JBL INVADER manual Controls on the Subwoofer Treble Bass, Muting, Troubleshooting

Models: INVADER

1 30
Download 30 pages 42.94 Kb
Page 5
Image 5
Muting

Muting

Turning the volume control knob completely counter-clockwise mutes the system.

Controls on the Subwoofer

Treble

Bass Controls on the Subwoofer

Bass - Turn the knob marked Bass clockwise to increase the subwoofer level or counterclockwise to decrease the subwoofer level.

Treble – Turn the knob marked Treble clockwise to increase the treble level or counterclockwise to decrease the treble level.

Troubleshooting

SYMPTOM

POSSIBLE PROBLEM

SOLUTION

NOTE

 

 

 

 

No sound from Speakers

No power to unit.

Make sure wall power

Check green power LED on

 

 

outlet or power strip has

the sub. Are the LED’s on?

 

 

power. Make sure all

If the sub’s led is not on,

 

 

switches for outlet/power

power is not getting to your

 

 

strip are on and that all

speaker system. Try the

 

 

switches for speaker

solutions shown.

 

 

system are on.

 

 

Is the control/right satellite of

Ensure that the control

There is an LED located in

 

your INVADER plugged in

speaker connector is

the bottom of each of the

 

correctly?

pushed in properly.

two satellite speakers.

 

 

Remove the control /right

These should both be lit. If

 

 

speaker connector from

they are, your speakers are

 

 

the subwoofer, then re-

both plugged in correctly.

 

 

connect this cable

 

 

 

ensuring that the

 

 

 

connector is pushed in

 

 

 

properly.

 

 

 

 

 

Distortion (static, crackling

Noise may be caused by

Turn monitor off to see if

 

or hissing sounds)

interference from the

noise is eliminated. Move

 

 

monitor.

speaker cables farther

 

 

 

away from monitor.

 

 

Speaker is being overdriven

Ensure that speaker is

 

 

by an amplified audio

connected to the

 

 

source.

appropriate receptacle.

 

 

 

Check color-coding on

 

 

 

connectors when making

 

 

 

connections. Make sure

 

 

 

that all signal cables are

 

 

 

inserted snugly into

 

 

 

receptacles.

 

 

Volume level on sound card

Check volume of sound

 

 

may be too high.

card via Windows Volume

 

 

 

Control.

 

 

Sound card or audio source

Check speakers with

Disconnect speaker input

 

material may be cause of

another audio source.

cable (green connector)

 

problem.

 

from sound card and plug

 

 

 

into CD ROM headphone

 

 

 

jack. If static is eliminated,

 

 

 

troubleshoot the soundcard.

Document Number: 950-0042

Description: MANUAL, JBL 4.1, All languages

Revision: 06

 

Page 5
Image 5
JBL INVADER manual Controls on the Subwoofer Treble Bass, Muting, Troubleshooting