Specifications - LSR6332

Input Impedance (Nominal): 4 ohm

Anechoic Sensitivity1: 93 dB/2.83 V/1 m (90 dB/ 1 W/ 1 m)

Frequency Response (60 Hz – 22 kHz):

+1. -1.5 dB

Low Frequency Extension2:

 

 

-3 dB:

54 Hz

 

-10 dB:

35 Hz

 

Enclosure Resonance Frequency: 33 Hz

Long Term Maximum

Power (IEC265-5): 200 W continuous average; 800 W peak

Recommended Amplifier Power: 150 W - 1000 W (rating into 4-ohm load)

High Frequency Control (2.5 to 20 kHz): 0 dB, -1 dB

Distortion, 96 dB SPL, 1 m3: Low Frequency (below 120 Hz):

2nd Harmonic: <1.5%

3rd Harmonic: <1%

Mid and High Frequency

(120 Hz to 20 kHz):

2nd Harmonic: <0.5%

3rd Harmonic: <0.4%

Distortion, 102 dB SPL, 1 m3: Low Frequency (below 120 Hz):

2nd Harmonic: <1.5%

3rd Harmonic: <1%

Mid and High Frequency

(80 Hz to 20 kHz):

2nd Harmonic: <1%

3rd Harmonic: <1% (Note: <0.4%, 250 Hz - 20 kHz)

Power Nonlinearity (20 Hz to 20 kHz):

30 Watts: <0.4 dB

100 Watts: <1.0 dB

Low-Mid Frequency Crossover:

4th Order Acoustic Linkwitz-Riley: 250 Hz

Mid-High Frequency Crossover:

4th Order Acoustic Linkwitz-Riley: 2.2 kHz

Transducers:

Low Frequency Model: 252G

Diameter: 300 mm (12 in)

Voice Coil: 50 mm (2 in) Differential Drive® with dynamic braking coil

Magnet Type: Neodymium

Cone Type: Carbon Fiber Composite

Impedance: 4 ohms

Mid Frequency Model: C500G

Diameter: 125 mm (5 in)

Voice Coil: 50 mm (2 in) aluminum edge wound

Magnet Type: Neodymium

Cone Type: Kevlar™ composite

Impedance: 4 ohms

High Frequency Model: 053TiS

Diameter: 25 mm (1 in) diaphragm

Voice Coil: 25 mm (1 in)

Magnet Type: Ceramic 5

Diaphragm Type: Damped titanium composite

Other Features: Elliptical oblate spheroidal waveguide

Impedance: 4 ohms

Physical:

Finish: Smooth dark graphite

Enclosure Volume (Net): 50 liter (1.8 cu ft)

Input Connectors: 5-way binding posts

Input Features: Bi-wirable

Mounting: 4 threaded mounting points conforming to industry standard square pattern, 127 x 70 mm (5 x 2.75 in) center to center. M6 metric thread.

Baffle Construction: Injection molded structural ABS

Enclosure Construction: 19 mm (3/4 in) MDF

Net Weight: 20.4 kg (45 lb)

Dimensions (WxHxD): 63.5 x 39.4 x 29.2 cm (25.0 x 15.5 x 11.5 in)

Caution: Unsafe mounting or overhead suspension of any heavy load can result in seri- ous injury and equipment damage. Mounting of speakers should be done by qualified persons in accordance with all applicable local safety and construction standards. Be certain to follow the instructions provided by the manufacturer of the mounting brack- et. Before selecting a mounting bracket, be certain that it is capable of supporting the weight of the speaker to be mounted.

20

Amplitude & Phase

96 dB/1 m (Distortion raised 20 dB)

Notes:

All measurements unless otherwise stated made anechoically at 2 meters and refer- enced to 1 meter by the inverse square law.

The reference measurement microphone position is located perpendicular to the center line of the mid and high frequency transducers, at the point 55 mm (2.2 in) below the center of the tweeter diaphragm

1Mean SPL from 100 Hz to 20 kHz.

2Describes anechoic (4p) low frequency response. Acoustic loading provided by the lis- tening room will increase low frequency bass extension.

3Distortion measurements performed with the input voltage necessary to produce the stated A-weighted SPL at the stated measurement distance. Distortion figures refer to the maximum distortion measured in any 1/10th octave wide band in the stated fre- quency range.

4Power nonlinearity figures based on the A-weighted deviation from linear increase in SPL with linear increase in input power (i.e., power compression) measured after 3 minutes of continuous pink noise excitation at the stated power input.

JBL continually engages in research related to performance improvements. New mate- rials, production methods, and design refinements are introduced into existing products without notice as a routine expression of that philosophy. For this reason, any current JBL product may differ in some respect from its published description, but will always equal or exceed the original design specification unless otherwise stated.

Page 20
Image 20
JBL LSR6300 owner manual Specifications LSR6332, 1Mean SPL from 100 Hz to 20 kHz

LSR6300 specifications

The JBL LSR6300 series of studio monitors is renowned for its exceptional sound quality and precision, making it a preferred choice for both professional studios and passionate audiophiles. With advanced technologies and meticulous engineering, the LSR6300 series delivers a clear, accurate listening experience that is vital for mixing and mastering.

One of the standout features of the JBL LSR6300 is its Image Control Waveguide technology. This innovation ensures not only a wide sweet spot but also excellent off-axis performance. This means that no matter where you are positioned in relation to the speakers, you'll receive a balanced and consistent sound. This technology allows for an even distribution of sound across the audio spectrum, making it easier for engineers to make informed decisions about their mixes.

In terms of drivers, the LSR6300 series boasts high-performance woofers and tweeters that are specifically designed to provide an extended frequency response. The 8-inch woofers replicate low frequencies with impressive depth, while the 1-inch neodymium tweeters deliver crisp high frequencies without introducing distortion. The result is a full-range output that captures the nuances of any audio material.

Another notable characteristic is the room tuning controls on the back of the monitor. These controls enable users to optimize the sound output based on the acoustic environment of their studio. By adjusting the low-frequency and high-frequency settings, you can compensate for any acoustic anomalies in the room, ensuring your mixes translate well to other playback systems.

Furthermore, the LSR6300 is equipped with JBL's patented Slip Stream port design. This rear-firing port minimizes turbulence and enhances low-frequency response. The design ensures that bass notes are rendered with clarity and punch, allowing for a dynamic listening experience without excessive boominess.

The robustness of the LSR6300’s construction is also noteworthy. With a solid enclosure that reduces resonance, the monitors are built to withstand the rigors of daily use. The sleek, professional appearance adds to their appeal in any studio setting.

In conclusion, the JBL LSR6300 series integrates advanced technologies and thoughtful design elements, making it an exceptional tool for audio professionals. With its accurate sound reproduction, flexible room control options, and thoughtful engineering, the LSR6300 continues to set a high standard in the field of studio monitoring.