| S310II | S312II | |||
Description: | |||||
Maximum Recommended |
|
|
|
|
|
Amplifier Power:** | 200W | 250W | |||
Nominal Impedance: | 8 Ohms | 8 Ohms | |||
Sensitivity (2.83V/1m): | 91dB |
|
| 92dB | |
Frequency Response | 37Hz – 20kHz |
|
| 35Hz – 20kHz | |
Crossover Frequencies: | 850Hz, 3500Hz |
|
| 750Hz, 3000Hz | |
| |||||
1" | 1" | ||||
| rubber surround, shielded; | rubber surround, shielded; | |||
| Elliptical Oblate Spheroidal™ | Elliptical Oblate Spheroidal™ | |||
| (EOS) waveguide | (EOS) waveguide | |||
Midrange Transducer: | 4" PolyPlas™ | 4" PolyPlas™ | |||
| cellulose fiber) cone, rubber | cellulose fiber) cone, rubber | |||
| surround, shielded; Linear Field | surround, shielded; Linear Field | |||
| Proximity™ (LFP) bezel | Proximity™ (LFP) bezel | |||
10" PolyPlas™ | 12" PolyPlas™ | ||||
| cellulose fiber) cone, rubber | cellulose fiber) cone, rubber | |||
| ™ |
| ™ | ||
| surround, SFG , magnetic | surround, SFG , magnetic | |||
| shorting rings, | shorting rings, | |||
| oversized Kapton® voice coil, | oversized Kapton® voice coil, | |||
| HeatScape™ motor structure, | HeatScape™ motor structure, | |||
| |||||
Baffles: | Low Diffraction, IsoPower™ | Low Diffraction, IsoPower™ | |||
Port: | FreeFlow™ flared | FreeFlow™ flared | |||
Network: | |||||
Terminals: | All- | metal, | |||
| binding posts | binding posts | |||
Dimensions (H x W x D): | 38" x 13" x | 41" x | |||
| |||||
| 965mm x 330mm x 318mm | 1041mm x 375mm x 311mm | |||
Weight per Speaker: | 55 lb/25kg | 77 lb/35kg | |||
All features and specifications are subject to change without notice.
*Trademark of Dolby Laboratories.
DTS is a registered trademark of Digital Theater Systems, Inc.
**The maximum recommended amplifier power rating will ensure proper system headroom to allow for occasional peaks. We do not recommend sustained operation at these maximum power levels.
7
