MOUNTING OPTIONS
SATELLITES AND SURROUNDS
On shelves. | On the wall. | On optional stands. |
| Wall brackets are included. |
|
ATTACHING THE SHELF STAND TO THE SPEAKER
Prepare the speaker wire as described on page 8. Thread the two conductors through the two holes in the stand bracket. Make sure to pre- serve the proper polarity
(+ and – connections) by threading the positive con- ductor through the hole on
+
–
the left, and the negative conductor through the hole on the right looking at the front of the stand. Push down on the red speaker ter- minal and insert the bare end of the positive wire into the hole under the red cap. Release the cap, and tug
Gently pull the slack out of the wire and screw the shelf stand onto the back of the speaker in two places, as shown.
gently on the wire to make sure that the connection is snug. Follow the same pro- cedure to connect the nega- tive wire to its terminal.
Use the larger screw in the upper screw hole, and the smaller screw in the lower screw hole
6
