JBL SCSSAT300 manual System Connection, Left Front, Center, +, Right Surround

SYSTEM CONNECTION

Connect each speaker to the corresponding speaker terminals on your receiver or amplifier.

If you are using a subwoofer, follow the directions in that owner’s guide to connect and configure it.

Configure your receiver or processor to reflect the cor- rect number of speakers in your system. If you have added one SCSSAT300/200 speaker to a 5.1-channel system, reconfigure it as

a 6.1 system. If you have added two SCSSAT300/200 speakers to a 5.1-channel system, reconfigure it as a 7.1 system.

The SCSSAT300/200 should be set to “Small.” If your receiver allows you to set the crossover frequency between the subwoofer and the speakers, select 100Hz or the setting that is the closest frequency below it.

Left Front

–+

Center		Right Front
–	+	–	+

Subwoofer

LFE In

	Receiver
Left￿	Subwoofer ￿		Right￿
Front￿		Out	Front
– ￿ +			–	+
	–	+

				Center
		Left￿	Surround Back￿		Surround Back￿		Right￿
	Surround￿			Left￿		Right￿	Surround￿
	–	+	–	+	–	+	–	+
Left Surround								Right Surround
–	+							–	+

–+

–+

Surround Back￿ Surround Back￿

Left Right

6