JBL Professional BASSQ manual Included Accessories, Introduction And Features

INTRODUCTION AND FEATURES

INTRODUCTION

Congratulations on your purchase of this Performance™ Series JBL BassQ™ processor! You have purchased a product that embodies the best of what JBL® engineers have learned about the emotional power of audio reproduction in more than fifty years of preeminence in the field. This processor has been designed and crafted to provide the user with a high level of sonic performance. Special attention has been paid to minimizing the number of components in the audio signal path, resulting in extremely low distortion, excellent transient response and wide dynamic range. JBL products set new bench- marks in audio technology and, when used as part of a complete JBL Performance Series system, will bring the ambience and acoustics of some of the world’s greatest concert halls and theaters into your home.

To obtain the best performance from this processor, please be sure to completely read this user’s manual and use the JBL BassQ processor only in accordance with its instructions.

FEATURES

The JBL BassQ processor features the following:

Minimum Phase Distortion

The algorithms used to calculate and correct the room modes are designed to give the best results with the least amount of phase-induced distortion.

This is unique to the JBL BassQ processor and is not available from any other product.

Mono or Stereo Inputs

Supporting both LFE and stereo sub- woofer inputs allows for a greater range of applications and allows the JBL BassQ unit to be used with a variety of different processors. Although the system has been designed to work with the rest of the Performance Series system, including AV1 and AVA7,

the unit can be used in almost any system and can improve the in-room response of almost any installation.

Multiple Subwoofer Outputs

Up to four subwoofers can be optimized. Multiple subs allow better seat-to-seat response and can greatly improve

the listening experience over a single subwoofer. The JBL BassQ unit allows optimizing multiple subs to achieve the most accurate in-room response possible.

Auto Turn-On and Power-Sequencing

Due to the high current demands of power amplifiers at the instant of turn-on, the JBL BassQ processor is equipped with a power-sequencing circuit that turns on each amplifier in a delayed sequence, avoiding the large instantaneous current demand (and possible circuit breaker tripping) that could otherwise occur, should more than one amplifier turn on at the same instant.

Multiple Microphone Inputs

Multiple microphones allow for the optimization of multiple seats. This results in a larger listening area that benefits from a more accurate room optimization.

Two Listening Curves

Two different playback curves have been implemented to better match the type of playback material. Cinema mode closely follows the standard for playback curves used in commercial cinemas and scoring stages. This will allow the system to closely match the experience of the directors and producers of popular films and TV shows. Music mode is a gentler playback curve that better mimics the frequency response in most music production studios.

INCLUDED ACCESSORIES

(1)JBL BassQ processor

(1)Remote control

(1)120V power cord

(1)230V power cord

(4)Microphone

(4)Microphone bases

(8)Microphone stands (two per microphone)

(1)Rack-mount set with hardware

(1)3.5mm male to 3.5mm male power trigger cable

(1)2.5mm male to 3.5mm male cinema/music trigger cable

4