Assembly
Depth Bar
Tine Assembly
The tiller. except the handle, throttle control, wheels, tine assemblies and controls, is fully assembled, packed and shipped in one container.
1Remove the tiller and all parts from the carton. Make certain that all loose parts and literature have been removed before the carton is discarded.
2Attach the depth bar to the tailpiece with the clevis pin and spring pin. (See fi~ure 1.)
Figure 1
Place the first outer tine assemb.ly on the tine shaft and fasten with the two hex head cap screws
Note: Be sure the tines are assembled so the sharpened edge enters the soil
first.
.
Figure 2
.1
