IF VECHICLE IS NOT EQUIPPED WITH A FACTORY 10 DISC
CD CHANGER, PROCEED TO STEP 5.
1. Locate the O.E.M. CD changer housing mounted to the rear passenger side of vehicle. Remove and discard (4) four screws. Remove and discard housing by moving it upward and outward. See Figure 1.
FIGURE 1
2.Disconnect wiring from CD changer. See Figure 2.
3.Using a 10mm deep socket, remove and retain
(4) four 6mm nuts which secure bracket to vehicle. See Figure 2.
FIGURE 2
4. Remove bracket from vehicle. Remove and retain (6) six screws which secure CD changer to bracket. See Figure 3. Lay CD changer in a safe place. Discard bracket.
FIGURE 3
IF VECHICLE IS EQUIPPED WITH A FACTORY 10 DISC
CD CHANGER, PROCEED TO STEP 6.
3