8.Route video and audio cables to rear passenger side VCP location. See Figure 7.
FIGURE 7
II.PREPARATION OF COMPONENTS FOR INSTALLATION
9.Remove and discard (2) two screws which secure mounting bracket (item 7 pg. 2) to housing. Insert CD changer (if equipped ) into mounting bracket and secure in original manner using (6) six O.E. screws. See Fig. 8.
FIGURE 8
10.Remove and discard (4) four screws from VCP. Loosely install (4) four #8 X 3/4” screws (item 1 pg. 2) in those locations. See Figure 9.
FIGURE 9
III. INSTALLATION OF HOUSING
IF VECHICLE IS NOT EQUIPPED WITH A FACTORY 10 DISC CD CHANGER,
PROCEED TO STEP 13.
11. Install CD player and bracket over O.E. studs and secure using original hardware. See Fig. 10.
12. Connect wiring to CD player.
FIGURE 10 | 5 |
