2.Drill a ¹⁄₂" (1.27 cm) deep hole in the bottom of the overlay panel for the bottom hinge pin as shown.

Bottom View

Electrical Requirements

A

¹⁷⁄₃₂"

(1.35 mm)

¹⁄₂"

(1.2 cm)

Back Surface

Front Surface

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

A. Radius 5.0

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for a ¹/₄" (6.35 mm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2¹⁄₂" (6.35 cm) minimum clearance on the hinge side to allow for the door to swing open.

NOTE: It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source. Do not install in a location where the temperature will fall below 55°F (13°C). For best performance, do not install the refrigerator behind a cabinet door or block the base grille.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended grounding method

A 115 Volt, 60 Hz., AC only, 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, unplug refrigerator or disconnect power.

Unpack the Refrigerator

WARNING

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

¹⁄₄" (6.35 mm)

2¹⁄₂" (6.35 cm)

Remove the Packaging

■Remove tape and glue residue from surfaces before turning on the refrigerator. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

■Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see “Refrigerator Safety.”

■Dispose of/recycle all packaging materials.

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to cover the floor with cardboard or hardboard to avoid floor damage. Always pull the refrigerator straight out when moving it. Do not wiggle or “walk” the refrigerator when trying to move it, as floor damage could occur.

5

Page 4 Page 6
Page 5
Image 5
Jenn-Air 2300279C Electrical Requirements, Location Requirements, Unpack the Refrigerator, Recommended grounding method
Page 4 Page 6

2300279C specifications

The Jenn-Air 2300279C is a high-performance appliance that has been designed to meet the demands of modern kitchens while offering unparalleled efficiency and style. As part of Jenn-Air’s renowned line of luxury appliances, the 2300279C exemplifies the brand’s commitment to innovation and quality.

One of the standout features of the Jenn-Air 2300279C is its powerful cooking technology. Equipped with advanced induction cooking, this appliance heats up quickly and offers precise temperature control. This allows users to produce exceptional culinary results, whether sautéing, simmering, or searing. The induction technology not only speeds up cooking time but also enhances energy efficiency, making it an environmentally friendly choice for the conscious consumer.

The design of the Jenn-Air 2300279C reflects a perfect blend of elegance and functionality. Its sleek surface complements any kitchen decor, featuring a modern aesthetic that stands out. The appliance often includes customizable options, allowing homeowners to integrate it seamlessly into their existing kitchen layout. This customizability is an essential aspect, as it helps to personalize the cooking space according to individual preferences.

A focal point of the Jenn-Air 2300279C is its intuitive control panel, which consists of touch-sensitive buttons that make navigating through settings easy. This user-friendly interface provides quick access to various cooking modes, timers, and temperature settings. Additionally, many models in this series are equipped with Smart features that enable users to control the appliance remotely via smartphone apps. This level of connectivity is perfect for the busy chef who needs to multitask while still preparing gourmet meals.

Safety is always a top priority in kitchen appliances, and the Jenn-Air 2300279C is no exception. The induction technology inherently provides safety features, including automatic shut-off and a cool-to-the-touch surface, which minimizes the risk of burns. This combination of technologies not only ensures optimal performance but also provides peace of mind when cooking.

In summary, the Jenn-Air 2300279C is more than just a premium cooking appliance; it is a testament to superior engineering and stylish design. With advanced cooking technologies, a sleek aesthetic, user-friendly controls, and an emphasis on safety, it is an exceptional choice for anyone looking to elevate their culinary experience. Whether you’re a seasoned chef or a home cooking enthusiast, the Jenn-Air 2300279C delivers the performance and features necessary to create delicious meals with ease.
Top Page Image Contents