Jenn-Air 8101P549-60 Specifications And Requirements, The rough opening for the drawer must be

SPECIFICATIONS AND REQUIREMENTS

WHEN INSTALLING BELOW A COUNTERTOP

Drawer overlaps will conceal cut edges on all sides of the opening.

The rough opening for the drawer must be:

¥Depth: 23-1/2" minimum from inside back to front of cabinet frame.

¥Width: 28-1/2"

¥Height: 9-1/4"

5" minimum above floor or 1" above toe kick. 23-1/4" from floor to bottom of cut- out is recommended for under countertop installation.

NOTE: If you are installing in frameless cabinets, it may be necessary to install 1/2" wide cleats to accept drawer mounting screws. See drawer to find exact locations of mounting screws.

WHEN INSTALLING BELOW A COOKTOP

Warming drawers are suitable for installa- tion below only certain specified cooktop models.

See the label attached to the top of the warming drawer for suitable models.

Install 2 x 4 or 2 x 2 anti-tip block against rear cabinet wall 9"fromfloor to bottom of block

Electrical outlet 16" max. from

left side

Electrical outlet flush with side of cabinet 7" max.

9”

Electrical outlet 42"	25”
max. from right side

7”

2” Min.*

91/4”

281/2"

11/2" Cabinettop

36” Countertop height

231/2” Min.

*NOTE: When installing warming drawer below a cooktop allow a 2" minimum from bottom of cooktop burner box to top of cutout.

3