Jenn-Air JBC7624BS manual Coffee System Use, Settings, Rinsing, Beep, Statistics, A B C Def G H

6. “TURNING OFF Please wait...” will be displayed. The coffee system will turn off.

7. Slide the coffee system forward using the handles as shown in the following illustration.

A

A

A

A. Handles

8.Open the coffee bean container lid, fill the coffee bean container with coffee beans and close the lid.

IMPORTANT: Do not place ground coffee, freeze-dried coffee, caramelized coffee or foreign objects into the coffee bean container, as they could damage the machine.

A. Coffee bean container

9.Push the coffee system back into the housing. It is now ready for normal use.

NOTE: When first using the coffee system, you need to make 4-5 cups of coffee and 4-5 cappuccinos before the coffee system gives good results.

NOTE: Each time the machine is turned on using the main On/Off switch, it runs a self-diagnosis function and then goes into standby mode. To turn the machine on again, press the On/ Standby button to the left of the coffee spout. See the illustration in the “Parts and Features” section.

COFFEE SYSTEM USE

A B C DEF G H I

	K		J
A. 1 Coffee	D. Strength	G. Up arrow key	J. OK
B. 2 Coffee	E. Display	H. Hot water	K. Size
C. Menu	F. Down arrow key	I. Cappuccino

Settings

You can control several settings through the Settings Menu: Rinsing, Beep, Statistics, Default Values, Water Hardness, Auto-Off, Coffee Temperature, Descaling, Auto-Start, Language and Adjust Time.

To access the Settings Menu, press MENU. To exit the Settings Menu, press MENU again.

Rinsing

This function is used to rinse the coffee spout or preheat the brewing unit if more than 2 minutes have passed since the machine was last preheated. Hot water from the rinse cycle can be used to preheat a small cup of coffee.

1.Press MENU.

2.Press the up and down arrow keys until “RINSING” is displayed. Press OK.

3.“OK to confirm” will be displayed. Press OK.

4.“Please wait...” and a progress bar will be displayed. 1 oz (30 mL) of hot water will run into the drip tray.

NOTE: If desired, you can place a small cup beneath the coffee spout. The hot water will warm the cup. Empty the hot water before using the cup for coffee.

Beep

The coffee system is factory-set with tones enabled, but they can be disabled.

1.Press MENU.

2.Press the up and down arrow keys until “BEEP Enabled” is displayed. Press OK.

3.“BEEP Disable?” will be displayed. Press OK to deactivate the tones.

4.Press MENU to exit the menu.

To reactivate the tones, repeat steps 1-4.

Statistics

This function allows you to view the machine statistics.

1.Press MENU.

2.Press the up and down arrow keys until “STATISTICS” is displayed. Press OK.

6