4.Make sure the milk intake tube is properly inserted into the
rubber washer, then replace the milk container lid.
A
A
B
A. Milk intake tube
B. Rubber washer
5.Position the milk frother pointer on the milk container lid between the words “Cappuccino” and “Caffelatte.” Move the pointer toward “Caffelatte” for a lighter froth and toward “Cappuccino” for a thicker froth.
A
B 
C
A. Lighter froth
B. Milk frother pointer
C. Thicker froth
6.Remove the hot water spout and attach the milk container to the hot water and steam nozzle.
A
B
A. Hot water and steam nozzle
B. Hot water spout
B |
A. Hot water and steam nozzle
B. Milk container
7.Place a cup under the coffee spout, and lift the milk spout over it as shown in the following illustration.
A |
B |
C |
A. Milk spout
B. Coffee spouts
C.Cup
8.Press CAPPUCCINO. “CAPPUCCINO” will be displayed. After a few seconds, frothed milk will run out of the milk spout and fill the cup below. After the milk runoff stops, coffee runoff will begin automatically.
NOTE: Press CAPPUCCINO at any time to stop the cappuccino process.
9.When the coffee runoff stops, the cappuccino is ready. Add sugar and powdered cocoa to taste.
If the coffee system runs out of milk during the milk runoff, release the milk container and add more milk. Reattach the milk container and press CAPPUCCINO to prepare more cappuccino.
After making cappuccino, always clean the internal tubes of the milk container lid and the hot water and steam nozzle.
11
