Jenn-Air JIVR /8530 warranty Before You Call for Service, Fault Codes

Before You Call for Service I0

If the cooling fan continues to operate after the oven has been turned off:

€this is normal. The fan will automatically shut off when the oven is cooled.

If a fan is heard while using the broil or clean modes:

•this is the cooling fan and is normal. The fan will continue to mn after use until the oven cools.

Fault Codes

€fault codes are shown in the display as "F" and a number. If a fault code appears in the display and beeps sound, press the Cancel pad. If the fault code and beeps con- tinue after pressing cancel, disconnect power to the wall oven. Wait a few minutes, then reconnect power to the oven. If the fault code and beeps still continue, discon- nect power to the wall oven and call an authorized servicer°

•if the oven is heavily soiled, excessive flare-ups may re- sult in a fault code during a clean cycle. Press Cancel pad and allow the oven to cool for one hour, then reset the clean cycle. If the fault code and beeps still continue, disconnect power to the appliance and call an authorized servicer.

•if an error beep sounds (two short beeps) with no fault code in the display, clean any spill from key pad area within 30 seconds. If, after 30 seconds the spill is not removed or another problem exists, an F7 fault code will be displayed. Disconnect power to the appliance and call an authorized servicer.