Contents
JRSD2460, JRSD2490, JRSD2790 Model JRSD2490
MODELS JRSD209, JRS229, JRSD2250, JRSD229
MJENN-AIR
Frost Free Refrigerators
Glass
instructions carefully
DO NOT use an adapter plug
locking feet, located near the front wheels. Rear
Your new refrigeratorhas two controls. One for
regulatingthe temperaturein the fresh food com
Fig. A
FOR MODELS JRSD2250 & JRSD2460
Page
bags, reduces moisture evaporation
procedure when replacing the door shelf front
BOTTOM
Page
The ice maker should be turned off arm up when
t-----r
TU, e
r thewaAt iso
diopeoslngerthe
firs
t glmpiaddicebea
Iceshould not bedispensed directly into thin glasses,fine china or delicate crystal -- they can crack or chip from the combined pressure of your hand pressing them against the actuator pad and Ice dropping into the container
Your refrigerator can be roiled out for cleaning. Turn the levelers, at each front comer of the cabinet, counterclockwise until they turn freey. Then pull the cabinet straight out. Note f you have an Automatic Ice Maker instaled,we recommend that you turn off the water supplybefore moving the cabinet
on the base grille withthe squareopeningsin the
cabinet and evaporates. During periods of high
cabinet and gentlytap each end in untilthe grille
locks in place
To replace the freezer light bulb 1 remove the icecube dispenser bin and the top freezer shelf 2 unhook the tabs on the top of the light shield by pressing in with your thumb on the centertop of the light shield 3 pivotthe shield down 4 unscrew the bulb when it is cool and replace it with a standard 40 watt appliance bulb 5 pivot the shield up into place, snapping the tabs into the slots 6 replace the freezer shelf and the ice cube dispenser bin
Refrigerator runs too frequently
Water on floor under cabinet
If You Need Service
