Jenn-Air UXT5236AD, UXT5436AD INSTALLATION7, Convertible Options, 3 1/4”x10” Vertical Discharge

INSTALLATION7

CONVERTIBLE OPTIONS

This range hood is equipped with the option of a 6” vertical discharge, 3 1/4”x10” vertical discharge, or 3 1/4”x10” rear discharge. Additional accessories are provided to convert to either of the above discharge methods.

Convertible Options		Convertible Accesories
Vertical discharge	6” round	Round to rectangular transition adaptor
Vertical discharge	3 1/4”x10”	Rectangular to round transition adaptor (pre-mounted)
Horizontal rear discharge	3 1/4”x10”	Gasket (pre-mounted)
		Rectangular rear cap (pre-mounted)
		3 1/4”x10” starting collar

3 1/4”x10” Vertical Discharge

1.Remove pre-mounted 6” transition adaptor or duct opening. Leave attached gasket in its original place.

2.Place rectangular transition adaptor as shown over gasket and by first installing 4 screws on half round section.

3.Mount the 3-1/4”x10” starting collar on top of transition piece with remaining screws.