MODIFICATIONS FOR AN ARMOIRE KIT INSTALLATION
Top Grille
1.Remove the four screws fastening each mounting plate to the sides of the refrigerator. Discard the mounting plates but keep the screws for attaching the two grille bracket assemblies provided in this kit.
2.Remove the two screws fastening the air divider to the unit housing. Discard the air divider, but replace the screws into the holes from where they were removed.
B
A
C
A. Grille bracket mounting plate
B. Air divider
C. Grille bracket mounting plate
3.Align the four holes in a grille bracket assembly with the four holes in a cabinet side, as shown. Using the screws removed in Step 1, attach the grille bracket assembly.
A
B
A. Grille bracket assembly
B.Screws
4.Repeat steps 2 and 3 to install the other grille bracket assembly to the opposite side of the refrigerator.
Install Refrigerator
IMPORTANT: Follow the “Installation Instructions” in the “Installation Guide” provided with your refrigerator.
1.Plug refrigerator into grounded 3 prong outlet.
WARNING
Tip Over Hazard
Refrigerator is top heavy and tips easily when not completely installed.
Keep doors taped closed until refrigerator is completely installed.
Use two or more people to move and install refrigerator.
Failure to do so can result in death or serious injury.
2.Move the refrigerator to its final location.
Install Grille Panel
1.Position the armoire grille panel between the grille brackets on each side of the cabinet.
2.Slide the grille panel down until the top of the grille panel hangs on top of the offsets of the grille brackets.
B
A 
C
D 
A. Offset in bracket | C. Grille bracket |
B. Grille | D. Grille bracket assembly |
8
