Jenn-Air W10342490D Installation Instructions, Venting Methods, Island Location, Blower Motor

INSTALLATION INSTRUCTIONS

Venting Methods

Determine which venting method is best for your application. Vent system can terminate either through the wall or floor.

Island Location

Front (Standard)-Mounted	Rear-Mounted Blower
Blower Motor	Motor

A A

A. Down vent

NOTE: For island locations, a front- or rear-mounted blower motor can also be mounted for right or left venting if needed for your application. Most island applications would still require the venting to be directed down through the floor.

Built-In Cabinet Locations

A

	C
B

A. Down vent

B. Left vent

C. Right vent

Island Location - Vent System Installed Under a Concrete Slab Using PVC Sewer Pipe

Front (Standard) Mounted Blower Motor

	B
A		D
M	C	E
		F
		G
L		H
K	J	I
Rear Mounted Blower Motor
	B
A		D
		E
M	C	F
		G
L		H

K JI

A. Wall cap

B. 6" (15.2 cm) round metal vent C. 16" (40.6 cm) maximum

D. 6" (15.2 cm) round PVC sewer pipe

E. 6" (15.2 cm) round metal vent transition with damper (supplied)

F. 6" (15.2 cm) round PVC coupling G. Concrete slab

H. 6" (15.2 cm) round PVC sewer pipe

I. 6" (15.2 cm) round 90° PVC sewer pipe elbow

J. Tightly pack gravel or sand completely around pipe. K. 6" (15.2 cm) round 90° PVC sewer pipe elbow

L. 6" (15.2 cm) round PVC coupling M. 12" (30.5 cm) minimum

Calculating Vent System Length

3¼" x 10" (8.3 x 25.4 cm) rectangular vent is required from the blower motor box. It can be transitioned to 6" (15.2 cm) round vent if needed.

Maximum Length of Vent System

Vent	Length
6" (15.2 cm) round	35 ft (8.9 m)
3¹⁄₄" x 10" (8.3 cm x 25.4 cm)	35 ft (8.9 m)

8