Jenn-Air W10418362B installation instructions Secure Dishwasher in Cabinet Opening

Connect wires black to black and white to white, using UL Listed/CSA Approved twist-on wire connectors (not included).

If needed, see website for animated representation of this step. Visit www.jenn-air.com/electricalunder FAQ tab.

Tighten strain relief screws to secure cable.

Place wires inside terminal box. Insert tabs on left side of cover. Make sure wires are tucked inside box. Close cover ensuring wires are not pinched. Use ¹⁄₄" nut driver or Torx® T20® screwdriver and previously removed screw to secure cover.

Secure Dishwasher in Cabinet Opening

Check that dishwasher is still level front-to-back and side-to-side in cabinet opening.

Open dishwasher door, remove lower dish rack, and place towel over pump assembly and lower spray arm of dishwasher. This will keep screws from falling into pump area when you are securing dishwasher to countertop.

NOTES:

■Do not drop screws into bottom of dishwasher.

■If side mounting, you must drill pilot holes in cabinet to avoid splitting the wood before installing screws. Locate brackets on top of dishwasher and secure dishwasher to countertop with two #10 x ¹⁄₂" Phillips-head screws (included). The dishwasher must be secured to keep it from shifting when door is opened.

21