IMPORTANT: Oven will preheat for approximately 7 to 10 minutes. At end of programmed Cook Time, oven will shut off automatically; retained heat will continue to cook food. Clock controlled cooking is not recommended for baked items that require a preheated oven, such as cakes, cookies, pies, breads. For these foods, place food in preheated oven, then use Timer to signal end of baking time. At the end of programmed Cook Time, the oven will shut off automatically and continuous "beeps" will signal until the Cancel/Off Pad is touched.
To set oven to start at future time and shut off automatically:
1.Follow preceding Steps
5.Touch Stop Time Pad.
Indicator Words SET STOP TIME will flash, Display will show the calculated stop time based on current time of day and cook time.
6.Turn Set Dial clockwise. A stop time can only be accepted for later in the day. NOTE: Since food continues to cook if left in the oven, it is suggested that the clock controls be used primarily to start the oven when no one is in the kitchen. Provisions should be made to have the food removed as soon as the signal has sounded. EXAMPLE: If at 10 o'clock you set the oven for 3500 for baking and 2 hours and 30 minutes cooking time, the calculated stop time would be "12:30". The Display would show:
JSFf12:30ST( T E _ _E
If you want the stop time to be 1 o'clock,turn the Set Dial until "1:00" appears in the Display Window. Three seconds after turning dial, the Display Window will return to current time of day, thus showing:
At the end of the delayed period, the DELAY Indicator Word will go off and the oven will begin to heat. 75 owill be shown. As the oven heats, the Display will show a rise in increments of 5° until programmed temperature is reached. At the end of programmed Cook Time, the oven will shut off automatically and continuous
"beeps" will be heard. Touch Cancel/Off Pad to cancel beeps.
To recall time function programmed: Touch the appropriate time pad.
To cancel: Touch Cancel/Off Pad.
NOTE: If more than 30 seconds elapse between touching a function pad and ii
turning the Set Dial, the oven is not set and Display will return to previous Display. j
13
