If foods bake unevenly:
•the oven may be installed improperly.
•check the oven rack with a level.
•stagger pans, do not allow pans to touch each other or oven wall.
•check instructions for suggested placement of pans on oven rack.
If oven baking results are less than expected:
•the pans being used may not be of the size or material recommended for best results.
•there may not be sufficient room around sides of the pans for proper air circulation in the oven.
•check instructions for preheating, rack position and oven temperature.
If baking results differ from previous oven:
•oven thermostat calibration may differ between old and new ovens. Follow recipe and use and care directions before calling for service since the calibration on the previous oven may have drifted to a too high or too low setting.
If F plus a number appear in the Display:
•these are fault codes. If a fault code appears in display and a continuous beep
sounds, push the Cancel/Off Pad. If the fault code reappears, disconnect power to the oven and call an authorized
If You Need Service
•call the dealer from whom your appliance was purchased or the authorized
•ifthedealerorservicecompanycannotresolvetheproblem, wrJtetoMAYCOR Parts and Service Co., P.O. Box 2370, Cleveland, TN
•use and care manuals, service manuals, and parts catalogs are available from MAYCOR for a nominal charge.
All specifications subject to change by manufacturer without notice.
27