ANHD20RTL12 INSTALLATION guide
w w w.JensenRVDirect.com
Tools & Supplies
•1 Drill or Battery Driver with a #2 Philips bit
•2 Putty Knife
•3 3/32” Allen wrench
•4 Electrical Tape
•5 Exterior Roof Sealant (Non-hardening type)
1Crank existing antenna to full elevation.
2Remove 3/32” set screw from crank. Remove crank, spring, directional handle, & 4 screws.
3Remove sealant & screws from base, remove antenna and clean surface
4Apply sealant to all holes & attach exterior plate using the included hardware
