Jensen CD1213 Preset Stations, Preset Scan / Automatically Store PS/AS, Mono/Stereo Selector Mono

CD1213

NOTE: The Scan function does not work correctly in “MANUAL” mode.

Preset Stations

Up to six stations on each band can be stored as presets and can then be instantly recalled by pressing the associated preset button on the front panel (19-24) or remote control. To store a station, turn the radio on and select the desired band and station. Press and hold the desired preset button (numbered one through six on the face of the radio or remote control) for more than two seconds. When stored, the preset number will appear in the display. The station is now stored and can be recalled at any time by pressing the corresponding preset button. Repeat for the remaining five presets on the current band and for all presets on the other three bands.

Preset Scan / Automatically Store (PS/AS)

Automatically Store

Select six strong stations and store them for all bands using the Automatic Store feature. To enable this feature, press and hold the PS/AS button (17) for more than two seconds. The radio will automatically scan each band and enter strong stations into the preset memory positions. After entering the stations into

memory, the unit will automatically stop at each station for five seconds so each can be heard. When using the Automatically Store feature, the new stations replace any stations already stored in preset memory.

Preset Scan

Press the PS/AS button (17) to scan the six preset stations in the AM band or all FM bands. The unit will stop at each station for five seconds before continuing to the next preset station, and the preset number will flash on the display during the preset scan. Press PS/AS again to stop scanning and listen to the current station.

Mono/Stereo Selector (MONO)

Press MONO (18) during FM radio operation to select mono reception of the broadcast signal. Under normal reception, the unit should be left in the stereo mode, as indicated by the “ST” designation that appears on the display panel when tuned to an FM stereo signal. If the signal is too noisy for comfortable listening, press MONO to switch to mono reception. The “ST” indication will disappear. Press MONO again to return to stereo mode.

Local / Distance Selector

This feature is used to designate the strength of the signals at which the radio will stop during automatic tuning. Distant, or “Dx” is the default setting, allowing the radio to stop at a broader

range of signals. To set the unit to select only strong local stations during automatic tuning, press the LO/DX button (25). The “LOC” icon appears in the display when LOCAL reception mode is selected.

6