![](/images/new-backgrounds/1181788/18178817x1.webp)
®
CD510K
Scan (Preview all Tracks)
Program CD Tracks
1 SCN
>2 sec
Press and hold the SCN button for more than two seconds to play first ten seconds of each track on current CD. Press and hold the SCN button for more than two seconds again to stop intro and listen to track.
5 PGM | Use Program function to select up to |
| 24 CD tracks to play in any order. |
| Program works by allowing you to |
| select a track number for each spot in |
| the playing sequence. A CD must be |
| inserted to use Program. |
Repeat the Same Track
1 | PWR | 1. Press Tuning Ring |
| ||
| M | up or down to |
| O | |
or | D | |
E |
| |
|
|
2 RPT
>2 sec
Press and hold the RPT button for more than two seconds to continu- ously repeat same track. RPT appears in the display. Press and
S | choose track |
E | number. |
L | |
| |
1 SCN |
|
hold the RPT button for more than two seconds again to stop repeat.
2
6 | MEM |
CLR |
2. Press MEM/CLR to enter |
track number into |
memory. Display shows |
next track number in |
Random (Play all Tracks)
sequence. Continue (up |
to 24 times) for all desired |
4 RDM
>2 sec
Press and hold the RDM button for more than two seconds to play all tracks on CD in random order one time. Press and hold the RDM button for more than two seconds again to
3
5 PGM
tracks. |
3. Press PGM to play CD in |
programmed order. |
stop random play.
Note: Direct access of tracks or discs cannot be performed while in Program CD function.
Direct Track Access
While a CD is playing or paused, press a preset button for less than two seconds to select the corresponding track number
1 SCN | 2 RPT | 3 | 4 RDM | 5 PGM | 6 | MEM | 7 | 8 | 9 | 10 | ET | |
CLR | ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
<2 sec
6 | CLR | To clear memory, press and hold |
MEM |
| |
|
|
MEM/CLR in PGM mode while
CD is playing.
Note:
•Do not expose CD player to extremely high or low temperatures.
•Do not drive with ejected CD in the slot.
9