®
CM715K
Dodge/Chrysler/Plymouth
1.Note the position of brackets on the exist- ing radio.
2.Match the brackets found in the hardware kit to the mounting tabs on your factory radio.
3.Attach the supplied brackets to the chassis of the radio with the four "machine thread" Phillips type screws. Use two screws for each bracket.
Typical Bracket Location
Jeep Grand Cherokee, Dodge Avenger, Plymouth Sebring
1.Note the position of brackets on the exist- ing radio.
2.Match the brackets found in the hardware kit to the mounting tabs on your factory radio.
3.Attach the supplied brackets to the chassis of the radio with the four "machine thread" Phillips type screws. Use two screws for each bracket.
RESET
RESET
11
11 | 4/10/99, 7:38 PM |
