Getting Started
Turning On/Off
Never attempt to move the TV unless the power cord has been disconnected.
Turning On
First, connect the power correctly..
Press 
on the TV or POWER
on the remote control.
Turning Off
Press 
on the TV or POWER 
on the remote control.
The TV enters standby mode and the image on the screen disappears.
The TV will still consume some power as long as the power cord is still inserted into the power outlet.
If you are not going to use this TV for a long period of time, be sure to remove the power cord from the power outlet.
Viewing Channels
Selecting an Antenna Input Source
Before you begin watching television, you must first select the
antenna source and
programming.
1.Press the MENU button on the remote control.
2.Press the ◄ / ► to select the CHANNEL menu.
3.Press▼to access and [Antenna] item will be highlighted.
4.Press the ◄ / ► to select [Air] or [Cable] according to what kind of connection is made with your TV.
4. Press▼to select [Auto Scan] and ► to confirm and continue.
If you choose [Air], please select [Start to Scan] item and press ► to confirm, then the TV starts Auto Program automatically.
If you choose [Cable], there are 3 kinds of Cable systems, including STD, IRC and HRC. Select [Auto] if unsure. (When you select [Auto], the unit automatically detects the proper cable source. If the unit fails to detect the type of cable system, please consult with your cable TV company to determine the proper system and enter this information.) Then please select [Start to Scan] item and press ► to confirm, the TV starts Auto Program automatically.
5.During the process of the auto search, you can press MENU or EXIT to exit.
Operate according to the steps
