SD1413
SERIES
Preset Stations
Up to six stations on each band can be stored as presets and can then be instantly recalled by pressing the associated preset button on the front panel
Preset Scan/Automatically Store (PS/AS)
Automatically Store
Select six strong stations and store them for all bands using the Automatic Store feature. To enable this feature, press and hold the PS/AS button (17) for more than two seconds. The radio will automatically scan each band and enter strong stations into the preset memory positions. After entering the stations into memory, the unit will automatically stop at each station for five seconds so each can be heard. When using the Automatically Store feature, the new stations replace any stations already stored in preset memory.
Preset Scan
Press the PS/AS button (17) to scan the six preset stations in the AM band or all FM bands. The unit will stop at each station for five seconds before continuing to the next preset station, and the preset number will flash on the display during the preset scan. Press PS/AS again to stop scanning and listen to the current station.
AF BUTTON(ALTERNATIVE FREQUENCIES)
When pressed short, AF button (18) switching mode is selected.
When AF switching mode is selected, the radio check the signal strength of the AF all the time. When pressed long, it is activated as regional mode ON/OFF.
- Regional mode ON:
AF Switching or PI SEEK is implemented to the station which have all PI codes are same as current station. REG segment is turned on, in LCD display.
- Regional mode OFF:
The Regional code in the format of PI code is ignored when AF switching or PI SEEK is implemented.
Some broadcasting stations may change their program from normal broadcasting to regional broadcasting for a certain period. When regional mode is off, the region identification in the PI code is ignored; the radio may switch to a local variant of the current program. When region mode is on, the radio will only switch to a program carrying the exact same PI code.
Note: When AF switch is on, at this moment use tuning up/down to search station will only stop at station which has RDS broadcasting.
TA BUTTON(TRAFFIC ANNOUNCEMENT)
When pressed short, it is activated as TA button
(25)mode on or off
When TA mode is on and traffic announcement is transmittude
-When the unit is in CD mode, it will switch to radio mode temporarily.
-If the volume lever was under the threshold point, it will be raised to the threshold point.
-When TP station is received, TP segment is turned on in LCD display.
When pressed long, EON TA LOCAL /EON TA DISTANCE mode is selected.
-EON TA LOCAL mode
When the field strength level of EON linked is less than the threshold level. The radio does not switch that station and user can hardly listen to any disturbances. “EON TA LO “ is displayed a few second.
- EON TA DISTANCE mode
EON TA switching is try to implemented by the information of current station “EON TA DX” is displayed a few second this mode is selected
Note: When TA switch is on, at this moment use tuning up/down to search station will only stop at station which has TA broadcasting.
PTY Button
Each time when this button is pressed, the PTY button(15)mode will toggle in the following order:
PTY Music Group
6
