Jensen UV8035 owner manual Subwoofer SUB-W, Balance, Fader, Treble

UV8035

•LEVEL

Turn the rotary encoder clockwise to increase or counter-clockwise to decrease the Mid-Range level from “-6” to “+6”. “00” represents a flat response.

•Mid-Range Center Frequency (C.Frq) Turn the rotary encoder to adjust the Mid- Range Center Frequency to 500Hz, 1KHz, 1.5KHz, or 2.5KHz.

•Mid-Range Quality Factor (BassQ)

Turn the rotary encoder to select one of the following Mid-Range Quality Factor options: 2N, 1N, 1W, 2W. The following chart depicts the curve characteristics for each step:

Middle Quality Factor Curve Characteristics

in the display. Continue pressing the rotary encoder to access the following Treble settings:

•LEVEL

Turn the rotary encoder clockwise to increase or counter-clockwise to decrease the Treble level from “-6” to “+6”. “00” represents a flat response.

•Treble Center Frequency (Freq)

Turn the rotary encoder clockwise to adjust the Treble Center Frequency to 10KHz, 12.5KHz, 15KHz or 17.5KHz.

Balance

To adjust the balance from “L12” (full left) to “R12” (full right), press the rotary encoder (4) until “Balance” appears in the display. Turn the

rotary encode adjust the balance between the left and right speakers. “C00” represents a center balance.

Fader

To adjust the fader from “F12” (full front) to “R12” (full rear), press the rotary encoder (4) until “Fader” appears in the display. Turn the rotary encoder to adjust the fader between the front and rear speakers. “C00” represents a center fader level.

Subwoofer (SUB-W)

After connecting a subwoofer to the back of the unit, press the SUB-Wbutton (13) to turn the subwoofer function “ON”. Press the rotary

Treble

To adjust Treble options, press the rotary encoder (4) repeatedly until “TREBLE” appears

3	10	11	9	18		19	2	8
12
13
4								22
6								21
14								UV8035
1	15	16	5	7	17			20
	13