Jensen UV9 System Reset, Steering Wheel Control SWC, SWC Functions, Select Operation

[RESET] Button

UV9

The Audio menu will automatically exit after a few seconds of inactivity. To exit quickly, touch the top left corner of the screen or press and hold the rotary encoder (11).

System Reset

To correct a system halt or other illegal operation, use the tip of a pen

to press the reset button (12) located

on the front bottom-right corner of the unit. After a system reset, the unit restores all factory default settings.

NOTE: If the unit is reset while a DVD is playing, the DVD resumes play once the reset is complete.

Steering Wheel Control (SWC)

The UV9 is compatible with the PAC (Pacific Accessory Corporation) steering wheel control adapter SWI-PS. A 3.5mm female connector (labeled “SWC Interface”) on the back of the head unit allows connectivity to the PAC adapter. Please refer to the instructions included with the PAC adapter for detailed installation information.

SWC Functions

The following controls are available for most vehicles:

1.Vol Down

2.Vol Up

3.Mute

4.Seek Down / Previous Track / ** Preset Down

5.Seek Up / Next Track / ** Preset Up

6.SRC (Source)

7.** Select

8.** Select

9.Band

**If additional steering wheel control buttons are available on the vehicle, function 7 / 8 may be assigned the "Select" feature. This feature / function may not be available on some vehicles.

Select Operation

If "Select" (function 7 or 8) is held down and function 4 is pressed momentarily, Preset Up will be selected. If "Select" (function 7 or 8) is held down and function 5 is pressed momentarily, Preset Down will be selected.

10