UV9
DVD/VCD VIDEO OPERATION
NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays “PARKING” with a blue background. Rear video screens, if applicable, will operate normally.
Controlling Playback
To access the
•VCD (PBC Off): Repeat Single, Repeat Off
NOTE: For VCD play, the repeat function is not available if PBC is on.
Sectional Repeat Function
Opening/Closing the TFT Video Screen
Opening the TFT Screen
To open the TFT video screen, press the OPEN button (1). The unit beeps and then opens.
Closing the TFT Screen
Press the OPEN button (1) again to close the TFT screen. If the screen is in the “IN” position, it moves out before closing.
Inserting a Disc
Upon inserting a DVD disc, DVD mode is entered and disc play begins.
BACK
1/2 
MENU
Stopping Playback
EQ | BACK |
| AUDIO |
| |
| SUB- |
| TITLE |
TITLE | 2/2 DISP |
Use the
•Press the REPT
•Press the REPT
•Press the REPT
Accessing the DVD Menu
Press the MENU button (1) on the remote control to recall the
NOTE: If Parental Lock (Rating) is activated and the disc inserted is not authorized, the
You cannot insert a disc if there is already a disc in the unit or if the power is off.
NOTE:
Ejecting a Disc
Press the 
button (16) on the unit or remote control (23) to eject the disc. The unit automatically reverts to Tuner mode. You may eject a disc with the unit powered off. The unit will remain off after the disc is ejected.
Resetting the Loading Mechanism
If the disc loads abnormally or an abnormal core mechanism operation occurs, press and hold the 
button (16) on the unit or remote control (23) to reset the loading mechanism. Normal operation resumes.
Accessing DVD Mode
To switch to DVD mode when a disc is already inserted, press the SRC button (10) on the front panel or remote control (8) until “DISC” appears at the bottom of the screen.
Touch the stop button (
) on the screen or press the 
/ BAND button (20) on the remote control to stop DVD play.
Pausing Playback
Touch the play/pause button (>) on the screen or press the >/
button on the remote control (16) to suspend or resume disc play.
Slow Motion Playback
Press the << button (20) on the remote control or the << button on the screen to play the current title in slow motion. Keep pressing and releasing the button to increase the rate from “2X” to “4X”, “8X”, and “20X”.
Press >/ (16) on the remote control or touch the
Fast Forward Playback
Press the >> button (12) on the remote control or the >> button on the screen to fast forward. Keep pressing and releasing the button to increase the rate from “2X” to “4X”, “8X”, and “20X”.
Press >/ (16) on the remote control or touch the
Repeat Playback
Press the REPT button (7) on the remote control or the 
button on screen to alter repeat mode according to the following:
•DVD: Repeat Chapter, Repeat TItle, Repeat Off
main DVD menu. Use the directional (arrow) buttons on the remote control to select a title from the menu or touch the title on screen.
Press the TITLE button (2) on the remote control or on screen to select a different title for playback.
Press the >/ button (16) on the remote control or press the rotary encoder (11) to confirm your selection and begin playback. You can also select a title using the touch screen.
Moving Through Chapters
Press the >> button (17) on the remote control or the >> button on screen to advance to the next chapter on the DVD.
Press the << button (15) on the remote control or the << button on screen to move to the previous chapter.
Goto Search
During DVD or VCD playback, perform the following steps to use the GOTO feature to access a specific location on a disc:
1.Press the GOTO button (19) on remote control to enter “GO TO” mode.
2.Press the >> or << buttons (14, 22) on the remote control to select a category (highlighted in blue).
15
