Jensen UV9 instruction manual Exiting the System Setup Menu

UV9

Audio Sub-menu Features

Setting	Options	Function
DRC	Off	Employ the Dynamic Range
		Control for better playback for
	On
		low volumes.
Loudness	Off	Turn bass boost on/off
	On
Subwoofer	Off	Turn the subwoofer on/off.
	On
Sub Filter	80Hz	Selecting a crossover fre-
		quency sets a cut-off frequency
	100Hz
		of the subwoofer's LPF (low-
	120Hz	pass filter).

Demo Sub-Menu Features

You can stop/run demonstration mode or turn Demo Auto Run on/off by chooing the “Demo” option from the SETUP MENU.

When "Demo Auto Run" is Off, you can select "Demo Mode > Run" to start Demo Mode. Demo Mode scrolls through the various source screens, simulating activity on the display. “Demo Mode” is discreetly displayed in yellow text (below the clock), to indicate the unit is in Demo Mode. To stop Demo Mode, press the upper-left quadrant of the TFT (Source select).

When “Demo Auto Run” is On, the unit will automatically display Demo Mode when powered on.

Rating Sub-menu Features

The DVD system has a built-in parental lock feature to prevent unauthorized persons from viewing restricted disc content. By default, the rating system is unlocked. Once setup, the parental lock is released only by entering the correct password. Once the password is entered, rating is available for setup.

Setting	Options	Function
Password	_ _ _ _	Enter a 4-digit password to
		activate the “Rating” feature.

Setting	Options		Function
Rating	1. Kid Safe		Select the appropriate rating
			level for the intended audience.
	2.	G
			You may override higher rat-
	3.	PG
			ings by using your password.
	4.	PG-13
	5.	PG-R
	6.	R
	7.	NC-17
	8.	Adult
Load Fac-	Reset		Select “Reset” to restore the
tory			factory default settings for the
			Rating system only.

To reset the password, access the “RATING” menu and enter the current password. Once the correct password is entered, you can access the “Password” field and enter a new one.

NOTE: Record the password and keep it in a safe place for future reference. The rating for each disc is marked on the disc, disc packing, or documentation. If the rating is not available on the disc, the parental lock feature is unavailable. Some discs restrict only portions of the disc and the appropriate content will play. For details, please refer to the disc description.

Hardware Sub-menu Features

If the rear-view video camera is connected, the unit is on, and the TFT monitor is retracted inside the unit, the TFT monitor automatically moves into the viewing position and Camera mode is selected upon shifting into REVERSE gear. When shifting into DRIVE gear, the TFT monitor is retracted back inside unit.

Setting	Options	Function
Camera In	Normal
	Mirror	Reverse the camera image as
		if looking through a rear-view
		mirror.
TFT Auto	On	The TFT panel automatically
Open		opens when the unit is turned
		on.
	Off	You must press the OPEN but-
		ton (1) to open the TFT panel.
	Manual	When the ignition is turned
		OFF, the TFT panel DOES
		NOT retract if it was previously
		out
		12

Setting	Options	Function
Video Input	NTSC	The color signals are output in
(Input cir-		the standard NTSC format.
cuitry auto-
	PAL	The color signals are output in
detects the
		the standard PAL format.
video sig-
nal from the	Auto	The color signal output is
Aux In		switched automatically based
source).		on the current video input sig-
		nal - NTSC or PAL.

If the monitor is in display mode, the monitor automatically switches to CAMERA mode upon reverse driving. When the reverse driving stops, the monitor return to its original input mode.

P.VOL Sub-menu Features

Setting	Options	Function
Source	Radio	Choose a source for which you
		would like to increase the rela-
	Disc
		tive volume (LEVEL).
	USB
	Aux In
	Navi
Level	0-6	Increase relative volume for
		specified source up to 6 deci-
		bels.

TS Cal (Screen Calibration)

To access the “Screen Calibration” function from the SETUP menu, select the “TS CAL” option.

After entering calibration mode, a crosshair appears in a corner quadrant of the screen. To begin calibration, press and hold the crosshair for one second until it moves to the next quadrant. Continue for each quadrant until the calibration is completed.

Exiting the System Setup Menu

To exit setup mode and resume normal playback, press the SETUP button (29) on the remote control or touch the BACK button on the screen.