Jensen VM9512 Exiting the System Setup Menu, VOL Sub-menu Features, TS Cal Screen Calibration

VM9512

Setting	Options	Function
Camera In	Normal
	Mirror	Reverse the camera image as if
		looking through a rear-view mirror.
TFT Auto	Auto	The TFT panel automatically opens
Open		when the unit is turned on.
	Manual	When the ignition is turned OFF, the
		TFT panel DOES NOT retract if it
		was previously out
	Off	You must press the OPEN button
		(1) to open the TFT panel.
TFT Set Back	Off	TFT screen remains fully extended.
	On	TFT screen moves back slightly
		after opening.
Auto Dimmer	Off	TFT screen brightness remains
		constant unless manually adjusted.
	On	TFT screen will automatically dim
		when less light is available.

If the monitor is in display mode, the monitor automatically switches to CAMERA mode upon reverse driving. When the reverse driving stops, the monitor return to its original input mode.

P.VOL Sub-menu Features

Setting	Options	Function
Source	DISC	Choose a source for which you
		would like to increase the relative
	RADIO
		volume (LEVEL).
	SD	Use the +/- buttons to increase rela-
	SAT	tive volume for specified source up
		to 6 decibels.
	AUX 1
	USB
	BT
	AUX 2
	iPod
	NAV

TS Cal (Screen Calibration)

To access the “Screen Calibration” function from the SETUP menu, select the “TS CAL” option.

After entering calibration mode, a crosshair appears in a corner quadrant of the screen. To begin calibration, press and hold the crosshair for one second until it moves to the next quadrant. Continue for each quadrant until the calibration is completed.

To exit without performing calibration, touch the BACK button.

Exiting the System Setup Menu

To exit setup mode and resume normal playback, press the SETUP button (31) on the remote control or touch the BACK button on the screen.

19