Jensen Tools 100 Sereis Answer an Incoming Call, Handset Mode, Speakerphone/Headset Mode

BudgeTone-100 User Manual Grandstream Networks, Inc.

Examples:

•If the target IP address is 192.168.0.10, the dialing convention is

MENU_key 192 168 000 010

followed by pressing the “SEND” key or wait for seconds in the No Key Entry Timeout.

•If the target IP address/port is 192.168.1.20:5062, then the dialing convention would be: MENU_key 192168001020*45062

followed by pressing the “SEND” key wait for seconds in the No Key Entry Timeout.

5.3.3Answer an Incoming Call

There are two ways to answer an incoming call:

1.Pick up the handset to answer the call normally using handset, or

2.Press the SPEAKERPHONE button to answer in speakerphone or headset mode

5.3.4Handset Mode, Speakerphone/Headset Mode

Handset mode and Speakerphone/Headset mode cannot be enabled at the same time. Pressing the hook-switch or Speakerphone button would toggle the phone between these two modes.

5.3.5Call Hold

While in conversation, pressing the “Hold” button will put the remote end on hold. Pressing the “Hold” button again will release the previously Hold state and resume the bi-directional media.

5.3.6Call Waiting and Call Flashing

If call waiting feature is enabled, while the user is in a conversation, he will hear a special stutter tone if there is another incoming call. User then can press FLASH button to put the current call party on hold automatically and switch to the other call. Pressing flash button toggles between two active calls.

- 15 -