BudgeTone-100 User Manual Grandstream Networks, Inc.
- 31 -
F
irmware Key: (in Hexadecimal Representation)
A
uthenticate Conf File: No Yes (cfg file would be authenticated before acceptance if set to
Yes)
Lock keypad update: No Yes (configuration update via keypad is disabled if set to Yes)
Allow conf SIP Account
in Basic Settings: No Yes
Override MTU Size: 0
Update Cancel Reboot
All Rights Reserved Grandstream Networks, Inc. 2005
Admin Password Administrator password. Only administrator can configure the “Advanced
Settings” page. Password field is purposely blanked for security reason after
clicking update and saved. The maximum password length is 25 characters.
SIP Server
IP address or FQDN domain name provided by VoIP service provider.
e.g., the following are some valid examples:
sip.my-voip-provider.com or sip:my-company-sip-server.com or
192.168.1.200:5066 (where 5066 is the port number different to default 5060)
Outbound Proxy IP address or FQDN domain name of Outbound Proxy (or called Media Gateway
or Session Border Controller). Used by IP phone for firewall or NAT penetration
in different network environment. If symmetric NAT is detected, STUN will not
work and ONLY outbound proxy will provide solution for it.
SIP User ID User account information, provided by VoIP service provider (ITSP), usually has
the form of digits similar to phone number or actually a phone number
Authentication
ID
ID used for authentication, usually same as SIP user ID, but could be different
and decided by the ITSP
Authenticate
Password
Account information, password for IP Phone to register to (SIP) servers of ITSP.
Maximum length is 25 characters.
Preferred
Vocoder
The BudgeTone IP phone supports up to 8 different codec types including
G711-ulaw (PCMU), G711-alaw (PCMA), G723, G729A, G726-32 (ADPCM),
G722, G728 and iLBC.
A user can configure codecs in a preference list that will be included with the
same preference order in SDP message. The first codec in this list can be entered
by choosing the appropriate option in “Choice 1”. Similarly, the last codec in
this list can be entered by choosing the appropriate option in “Choice 8”.
G723 Rate: Encoding rate for G723 codec. By default, 6.3kbps rate is set.