25.Do not make a cut which exceeds the capacities of the cold saw as shown in the specifications section of this manual.
26.Use recommended accessories; improper accessories may be hazardous.
27.Maintain tools with care. Keep blades sharp and clean for the best and safest performance. Follow instructions for lubricating and changing accessories.
28.Make sure the work piece is securely attached or clamped to the table. Never use your hand to hold the work piece.
29.Turn off the machine and disconnect from power before cleaning. Use a cloth or brush to remove chips or debris — do not use your hands.
30.Do not stand on the machine. Serious injury could occur if the machine tips over.
31.Never leave the machine running unattended. Turn the power off and do not leave the machine until it comes to a complete stop.
32.Remove loose items and unnecessary work pieces from the area before starting the machine.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or possible machine damage.
This means that if precautions are not heeded, it may result in serious injury or possibly even death.
- - SAVE THESE INSTRUCTIONS - -
4.0Introduction
The JET
This manual is provided by JET covering the safe operation and maintenance procedures for the JET Cold Saw. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. Your machine has been designed and constructed to provide years of
If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our web site: www.jettools.com.
Retain this manual for future reference. If the machine transfers ownership, the manual should accompany it
5