Introduction
This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures for the JET JBG Series Bench Grinders. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site: www.wmhtoolgroup.com.
Specifications
Model |
| ......................... | ....................... |
Stock Number: | 577101 | .......................... 577102 | .......................... 577103 |
Overall Dimension (L x H x D/in): | 18 x | ............ 19 x | ...... |
Wheel Size (D x W x Bore /in): | 6 x 3/4 x 1/2 | ..................... 8 x 1 x 5/8 | ...................... 10 x 1 x 1 |
Wheels Included/Grit: | 36 & 60 | ..........................36 & 60 | ..........................24 & 46 |
Motor: | 1/2HP, 120V, 1Ph | ............ 1HP, 120V, 1Ph | ...... |
Motor RPM | 3,450 | ............................. 3,450 | ............................. 1,725 |
Gross Weight (LBS): | 38 | .................................. 60 | ................................ 119 |
The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, WHM Tool Group reserves the right to change specifications at any time and without prior notice, without incurring obligations.
Read and understand the entire contents of this manual before attempting assembly or operation! Failure to comply may cause serious injury
6
