Jet Tools manual Specifications, JDP-20VS-3

Specifications:		JDP-20VS-1	JDP-20VS-3
Stock Number...		354201	.354203
Drilling Capacity
Cast Iron (in.)		1-1/2	1-1/2
Steel (in.)	,	1-1/4	1-1/4
Tapping Capacity (in.)		NA	3/4
Column Capacity (in.)		4.	4
Spindle to Column (maximum - in.)		10	10
Spindle Travel (in.)		6-1/2	6-1/2
Spindle Distance to Table (in.)	"	28-1/2	28-1/2
Table Size (in.)		22 x 19-1/2	22 x 19-1/2
Number of T-Slots		2	2
T-Slot Size (in.)		5/8	.5/8
T-Slot Centers (in.)		8-7/8	8-7/8
Spindle Taper		MT-3	MT-3
Spindle Speeds		Variable	Variable
Spindle RPM (approx.)		300-2,000	150-2,000
Motor		1-1/2 HP, 1 Ph	2 HP, 3 Ph,
		115/230V	2-Speed
		prewired 230V	.230V only
Overall Height (in.)		69	.69
Base Size (in.)		26 x 19	26 x 19
Table Size (in.)		20	.20
Net Weight (approx. - Ibs.)		720	740
Shipping Weight (approx. -Ibs.)		754	774

The specifications in this manual are given as general information and are not binding. JET Equipment and Tools reserves the right to effect, at any time and without prior notice, changes or alterations to parts, fittings, and accessory equipment deemed necessary for any reason whatsoever.

5