Grounding Instructions

Caution: This tool must be grounded while in use to protect the operator from electric shock.

In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Do not modify the plug provided. If it will not fit the outlet, have the proper outlet installed by a qualified electrician.

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor, with insulation having an outer surface that is green with or without yellow stripes, is the equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment-grounding conductor to a live terminal.

Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the tool is properly grounded. Use only three wire extension cords that have three-prong grounding plugs and three-pole receptacles that accept the tool’s plug.

Repair or replace a damaged or worn cord immediately.

115 Volt Operation

As received from the factory, your sander is ready to run at 115 volt operation. This sander, when wired for 115 volt, is intended for use on a circuit that has an outlet and a plug that looks like the one illustrated in (A). A temporary adapter, which looks like the adapter as illustrated in (B), may be used to connect this plug to a two-pole receptacle, as shown in (B) if a properly grounded outlet is not available. The temporary adapter should only be used until a properly grounded outlet can be installed by a qualified electrician. This adapter is not applicable in Canada. The green colored rigid ear, lug, or tab, extending from the adapter, must be connected to a permanent ground such as a properly grounded outlet box, as shown in (B).

5

Page 4 Page 6
Page 5
Image 5
Jet Tools JOVS-10 owner manual Grounding Instructions, Volt Operation
Page 4 Page 6

JOVS-10 specifications

The Jet Tools JOVS-10 is a sophisticated and versatile tool that appeals to woodworking enthusiasts and professionals alike. Known for its durability and precision, the JOVS-10 stands out due to its robust build quality and impressive performance features. With a strong emphasis on user-friendliness, this tool is designed to meet the rigorous demands of woodworking tasks, ensuring that both beginners and experienced craftsmen can utilize it effectively.

One of the main features of the JOVS-10 is its powerful motor, which delivers exceptional cutting strength while maintaining a quiet operation. This motor is specifically engineered to provide a smooth and consistent power feed, allowing users to achieve clean and accurate cuts every time. With its variable speed control, users can adjust the cutting speed according to their specific project needs, making it highly adaptable for a variety of materials.

The JOVS-10 is equipped with advanced blade technology, which includes a high-tension system designed to keep the blade in optimal condition. This feature not only extends the life of the blade but also enhances the overall cutting performance. Additionally, the tool incorporates a precision-engineered fence system that provides stability and accuracy during operation. This is particularly beneficial for making precise bevel cuts and intricate designs.

Another notable characteristic of the JOVS-10 is its portability. The tool features a compact design that allows easy transportation and storage, making it an ideal choice for those who work in different locations or have limited workspace. Although compact, it does not compromise on stability or performance, and the base is engineered to minimize vibrations during operation.

Safety is a paramount concern with the JOVS-10. It comes with several safety features, including a blade guard and automatic shut-off systems, which help prevent accidents and ensure safe usage. The ergonomic design of the tool also allows for comfortable handling, reducing strain during prolonged use.

In terms of technologies, Jet Tools has integrated innovative solutions to enhance the functionality of the JOVS-10. The use of high-quality materials ensures durability, while the precision manufacturing processes guarantee that each tool meets strict quality standards. Overall, the Jet Tools JOVS-10 is a formidable addition to any workshop, combining high performance with user-centric designs that cater to the needs of both amateurs and seasoned professionals in woodworking.
Top Page Image Contents