Unpacking – JWBS-14CS
Open both shipping containers and check for shipping damage. Report any damage immediately to your distributor and shipping agent. Read the instruction manual thoroughly for assembly, maintenance and safety instructions.
Contents of the Shipping Container
Container One: | 2 | Table lock knobs | |
1 | Closed stand with motor | 1 | Table pin |
1 | Pulley cover | 1 | Trunnion support bracket |
1 | 1 | Fastener package (see below) | |
|
| 1 | Instruction Manual |
Container Two: | 1 | Warranty Card | |
1Saw body
1Table
Fasteners
A. Saw Body to Stand | D. Trunnion Support Bracket to Saw Body | ||
4 | – M8x40 hex cap screws | 2 | – M8x30 hex cap screws |
| (approx. |
| (approx. |
8 | – M8 flat washers | 2 | – M8 lock washers |
4 | – M8 lock washers | 1 | – M8x80 hex cap screw (for table stop - |
4 | – M8 hex nuts |
| approx. |
|
| 1 | – M8 hex nut (for table stop) |
B.Strain Relief Plate to Stand
2 – M5x12 pan head machine screws
C.Pulley Cover to Base 2 – Knobs
8
