Specifications |
|
Stock Number | 708620 |
Outer Filter | 5 Microns |
Inner Filter | 1 Micron |
Overall Dimensions (LxWxH/in) | |
Sound Rating @ 3ft | High Speed 69 dB |
................................................................................................................................ | Medium Speed 67 dB |
...................................................................................................................................... | Low Speed 62 dB |
Air Flow | High Speed 1044 CFM |
........................................................................................................................... | Medium Speed 702 CFM |
................................................................................................................................. | Low Speed 556 CFM |
Motor | 1/5 HP, 115V, 60Hz, 1 Ph, 6P |
Net Weight | 54 lbs. |
Shipping Weight | 61 lbs. |
Table of Contents | Page |
Warranty | 2 |
Warnings | 3 |
Electrical Requirements | 4 |
Specifications | 5 |
Table of Contents | 5 |
For Your Own Safety | 5 |
Contents of Shipping Carton | 6 |
Tools Required for Assembly | 6 |
Assembly | |
Controls and Features | |
Changing Filters | 8 |
Breakdown | 9 |
Parts List | 10 |
FOR YOUR OWN SAFETY
1.Read and understand instruction manual before installing or operating air cleaner.
2.To reduce the risk of injury disconnect the air cleaner from the power source (unplug) before servicing or changing filters.
3.If ceiling mounted, bottom of air cleaner must be at least 7 feet above the floor.
4.If ceiling mounted, mounts must be anchored to building structure which will support a minimum of at least 100 pounds. Never mount to surfaces such as dry wall or false ceiling grids, etc.
5.To reduce the risk of electrical shock, do not expose air cleaner to water or rain.
6.Never duct a machine directly into the air cleaner.
7.To avoid a potentially dangerous situation, do not use this equipment to filter volatile fumes or smoke. This air cleaner is designed and intended for the filtration of air borne wood dust only. It is neither designed or intended for any other purpose whatsoever.
8.Failure to comply may result in serious injury and / or property damage.
The specifications in this manual are given as general information and are not binding. JET Equipment
&Tools reserves the right to effect, at any time and without prior notice, changes or alterations to parts, fittings, and accessory equipment deemed necessary for any reason whatsoever.
5