Speed button (B, Fig. 3) controls the three different settings, Low, Medium and High. There is also a manual button (A, Fig. 4) on the backside of this unit which controls the speed.
On/Off button (C, Fig. 3) turns the unit on and off. There is also a manual on/off button (B, Fig.
4)on the backside of the unit. Pressing this button will turn the machine on Low.
Fuse switch (C, Fig. 4) will pop out in the case of overload. Wait
Changing the Filters
WARNING
To reduce therisk of injury disconnect the air cleaner from the power source (unplug) before servicing or changing filters. Failure to comply may cause serious injury!
There are two filters that need to be changed. The outer filter can easily be removed by disengaging the two clips (A, Fig. 5).
Now you can simply pull the filter out, or use a screwdriver to pop the filter out.
The inner filter (A, Fig. 6) can now be pulled out of the unit. The inner filter can be blown out with air, or washed out.
The filters should be replaced depending on the amount of usage and the environment of your shop. Clogged filters will reduce the amount of air circulation. There is an arrow indicating the air flow direction on the outer filter. Make sure the filter is inserted facing the proper direction.
Replacement Filters
708733 inner filter
708731 electrostatic filter
708734 charcoal filter
708732 washable electrostatic filter
8
