mount the angle bracket (A, Fig. 10) to the pre-drilled holes in the cabinet using two 1/4-20 x 1-1/2” round head machine screws, two 1/4" flat washers, two 1/4” lock washers and two 1/4” hex nuts, (B, Fig. 10).
3.Mount the shelf to the three brackets with three 1/4-20 x 1-1/2” round head machine screws, three 1/4” flat washers, three 1/4” lock washers and three 1/4” hex nuts. The end with the cutout should be against the tablesaw cabinet facing down. Note: You may need to cut the length of the shelf to fit.
Follow the XACTA-Lift owner’s manual for installation instructions.
Stand Alone Router Cabinet
The cabinet can be used as a stand alone unit by mounting a wood router table to the top using the included runners and wood screws.
