|
| Troubleshooting |
|
|
|
Symptom | Troubleshooting | Explanation |
|
|
|
The power does not | Check if the Hold switch is On. | iAUDIO does not operate with the |
come on. | Try again after turning the Hold | Hold switch On. |
| switch off. |
|
|
|
|
| Check if the same phenomena | iAUDIO does not work if the bat- |
| occurs even after connecting AC | tery is weak. |
| adaptor / USB cable. |
|
|
|
|
There is no sound. | Check if the music files are stored | iAUDIO does not start playback if |
| in iAUDIO. | there is no music files. |
| Check if the Hold switch is On. | iAUDIO does not operate with the |
| Try again after turning the Hold | Hold switch On. |
| switch off. |
|
FM radio does not work. | FM reception may be poor and you may not be able to hear FM radio | |
| clearly depending on where you are, such as inside a building or a mov- | |
| ing car. In addition, listening to the radio may become impossible in some | |
| areas. Please try to listening at different locations. | |
|
| |
| If FM radio does not work where reception should be possible, there may | |
| be a problem in the reception module. In this case, please contact our | |
| service center. |
|
|
| |
Characters on LCD are | Change the language setting in the Language menu of iAUDIO, and try | |
abnormal. | again. |
|
The capacity of flash | Some of the flash memory in iAUDIO is used for system area essential | |
mem is different or | for normal operation of iAUDIO. Therefore, the actual available capacity | |
reduced. | of the flash memory is somewhat reduced after excluding the system | |
(For example, 256MB is | area. For example, with a 256MB product, about 242MB of memory is | |
displayed for 242MB) | available for user area (for data/music files), and it is normal. | |
41
iAUDIO U2
