Master Level Knob

The Master Level Knob is used to control the output level of the Fathom when the Variable Level mode is selected on the front control panel.

When rotated fully counter clockwise, the Fathom’s output will be fully muted. When at the “0” or straight up position, the Variable gain level matches the Reference level setting. When turned fully clockwise, the Fathom’s output level is 15 dB higher than the Reference setting.

Lights

The “Lights” selector switch allows the user to select one of three indicator light modes.

“Off” turns off all of the front panel LED’s at all times.

“Dim” sets all of the front panel LEDs to a low brightness level when the Fathom is turned on.

“On” sets all of the front panel LEDs to full brightness level when the Fathom is turned on.

IMPORTANT: WHEN TROUBLESHOOTING OR CALIBRATING THE A.R.O. FEATURE, MAKE SURE THAT THE “LIGHTS” SWITCH IS SET TO “DIM” or “ON.”

LP Filter

The Low Pass (LP) Filter selector switch determines the operating mode of the Fathom’s built-in low pass filter.

“Off” defeats the low pass filter, completely removing this circuit from the signal path.

“12 dB” sets the roll off slope of the low pass filter to a 12 dB per octave slope (Butterworth alignment).

“24 dB” sets the roll off slope of the low pass filter to a 24 dB per octave slope (Linkwitz-Riley alignment).

The 24 dB setting more aggressively attenuates high frequencies above the LP Frequency setting (see below). If you are using the Fathom’s built-in low pass

fi lter, experiment with the LP Filter slope setting to achieve the best transition to your satellite speakers. If you prefer to use the filters and bass management features in your receiver or preamplifier, defeat the

on-board filter by selecting the “Off ” position.

LP Freq

The Low Pass (LP) Frequency selector knob allows the user to choose the roll- off frequency of the Fathom’s internal low pass filter. The frequency is variable between 30 Hz (full counter-clockwise) to 130 Hz (full clockwise). This knob does not affect the input signal in any way if the LP Filter switch is set to “Off ”.

80 Hz is a commonly used filter frequency and usually serves as a good starting point for adjustments.

IMPORTANT

Page 16

Fathom f110

Page 15 Page 17
Page 16
Image 16
JL Audio f110 owner manual Master Level Knob, Lights, LP Filter, LP Freq
Page 15 Page 17

f110 specifications

The JL Audio Fathom f110 is a compact yet powerful subwoofer designed to deliver exceptional low-frequency performance in a variety of listening environments. This subwoofer is an integral component of the Fathom series, which is renowned for its commitment to high-quality sound and advanced technology. The f110 is designed to blend seamlessly with both audiophile-quality music systems and home theater setups.

One of the key features of the f110 is its 10-inch subwoofer driver, which is engineered for high output and low distortion. The driver is constructed with advanced materials, including a cast-alloy basket and a high-temperature voice coil, ensuring durability and reliability. This design allows the f110 to produce deep, precise bass with minimal cone breakup.

The f110 is powered by a robust onboard amplifier that delivers an impressive 1,000 watts of peak power, allowing it to handle dynamic audio passages with ease. This amplifier utilizes JL Audio's Differential Drive technology, which enables the driver to achieve exceptional efficiency and linearity. As a result, the f110 can deliver powerful bass without sacrificing clarity or definition.

In addition to its impressive driver and amplifier, the Fathom f110 is equipped with sophisticated DSP (Digital Signal Processing) capabilities. This technology allows for precise room correction and equalization, ensuring that the subwoofer performs optimally in any environment. The user-friendly interface allows listeners to adjust various parameters, such as room size, frequency response, and phase alignment, to achieve the desired sound profile.

The cabinet of the f110 is constructed from high-quality MDF and features a sophisticated design that minimizes internal resonances. Its sleek and modern exterior includes an elegant finish that complements any décor, providing an aesthetically pleasing addition to any audio setup.

Connectivity is also a top priority for the f110, as it includes multiple inputs and outputs, allowing for easy integration with various audio systems. The subwoofer can be connected via line-level inputs or speaker-level inputs, providing versatility for different configurations.

Overall, the JL Audio Fathom f110 is a powerful and versatile subwoofer that epitomizes quality and performance. Its combination of advanced technologies, high-output capabilities, and user-friendly features make it a superior choice for any audio enthusiast looking to enhance their listening experience. Whether for music playback or home theater applications, the f110 delivers an impactful and immersive sound experience.
Top Page Image Contents