I N S T A L L A T I O N G U I D E
for the
SB-D-DRNGO2/10W3v3
2004 - Up Dodge Durango
2007 - Up Chrysler Aspen
Will not fit SUVs with the facotry woofer
and or power lift gate
If you choose to perform the installation yourself, it is absolutely vital that the Stealthbox® be properly mounted to the vehicle according to these instructions. Failure to mount the enclosure properly presents two problems:
1)The
2)A loose enclosure presents a serious safety hazard in the event of a collision or sudden deceleration.
INSTALLATION D I F F I C U LT Y :
2OUT
5OF
ESTIMATED TIME:
1 HOUR
Thank you for choosing a JL Audio Stealthbox® for your automotive sound system. With proper
installation, your new
We strongly recommend that you have your new Stealthbox® installed by your authorized JL Audio dealer. The installation professionals employed by your dealer have the necessary tools and experience to disassemble and reassemble your vehicle properly. Also, keep in mind that your warranty coverage extends to 2 years if your system is installed or approved by your authorized JL Audio dealer. If you prefer to perform your own installation, please read this installation guide completely
before beginning the process.
S T E P 1
From outside the SUV, remove the driver’s side rear plastic wheel well.
S T E P 2
From inside the SUV, place the supplied wax square onto the driver’s side wheel well, as in the picture.
S T E P 3
Thread the supplied socket cup screw into the rear of the Stealthbox®, leaving
Place the Stealthbox® into the mounting location and press firmly onto the Stealthbox®.
Remove the Stealthbox® carefully, leaving the wax square in place. The socket cup set screw will leave an impression onto the wax square.
Continued on Next Page
