JMR electronic G6 Default Slot ID , Setting Slot ID

Default Slot ID
Drive Bay Default ID/Jumper
Slot 0 (top) ID 0 / W1
Slot 1 ID 1 / W2
Slot 2 ID 2 / W3
Slot 3 ID 3 / W4
Slot 4 ID 4 / W6
Slot 5 ID 5 / W7
Setting Slot ID
The ID for each slot can be set using jumpers located on the backplane of the unit.
To access the jumpers the blower must be removed. To remove the blower refer
to Chapter 5.
The following tables show the jumper settings for Fibre ID’s 0-127.
FORTRAForce4G6 InstallationGuide Rev B 4-2
Jumper 6 Jumper 5 Jumper 4 Jumper 3 Jumper 2 Jumper 1 Jumper 0
W1 - Slot 0 ID
Jumpers
W2 - Slot 1 ID
Jumpers
W3 - Slot 2 ID
Jumpers
W4- Slot 3 ID
Jumpers
W6 - Slot 4 ID
Jumpers
W7 - Slot 5 ID
Jumpers
NOTE: W1 sits above
W2 behind a metal
plate. W1 can not be
seen in this photo.