Power Supply Replacement
If the Power supply Status LED indicator is ‘Red’, the power supply may need to
be replaced. The unit should be reset (turned on & off), and the power supply
should be removed and then reinstalled. The AC cable connection in the back of
the unit should be checked to ensure that the plug is firmly seated in the power
supply. If the Status LED indicator is still ‘Red’, then the power supply should
be replaced.
If the power supply fan is not functioning but the power supply still works, the
power supply should be replaced as soon as possible. Leaving the power supply
running without the fan could cause the power supply to overheat and shutdown
at any time and may cause damage to the supply and other installed devices.
If you believe a power supply is in a nonfunctional state, please contact the place
of purchase for repair or replacement.
The JMR part number for a replacement power supply is shown in the following
table. Replacement parts include the canister with the power supply.
Model JMR Part Number Color
4-bay DSSH-085 Silver
4-bay DSSH-085-02 Black
FORTRAForce4G6 InstallationGuide Rev B 6-2