John Lewis JLBICO2 instruction manual Replace the light bulb, To replace the light bulb, Problem

Models: JLBICO2

1 32
Download 32 pages 13.28 Kb
Page 24
Image 24
Replace the light bulb

Problem

When the oven is operating I can hear some strange noises!

The food doesn’t heat up or heats very slowly!

The food is too hot, dried out or burnt!

I hear some noises after the cooking process is finished!

The oven switches on but the interior light does not go on!

Possible sollution (Check if

)

The oven’s power is switched on.

The door is completely closed. The door should close with an audible click.

There are any foreign bodies between the door and the cavity front.

There is any electrical arcing inside the oven caused by foreign metallic objects.

The ovenware is touching the oven walls.

There are any loose items of cutlery or cooking tools inside the oven.

You have inadvertently used metal ovenware.

You have selected the correct operating times and power level.

The food you have put inside the oven is a larger amount or colder than you usually put in.

Have you selected the correct operating time and power level.

This is not a problem. The cooling fan keeps on working for some time. When the temperature has dropped sufficiently, the fan will switch itself off.

If all the functions work properly it is probable that the lamp has blown. You can keep on using the oven.

Replace the light bulb

To replace the light bulb,

1.Disconnect the oven from the power supply. Take the plug out of the socket or switch off the oven’s power circuit.

2.Unscrew and remove the glass light cover

(1).

3.Remove the halogen light bulb (2).

Warning! The bulb may be very hot.

4. Fit a new 12V / 10W halogen bulb.

Warning! Do not touch the light bulb surface directly with your fingers because you may damage the bulb. Follow the lamp manufacturer’s instructions.

5.Screw the glass light cover into place (1).

6.Connect the oven again to the power supply.

24

Page 24
Image 24
John Lewis JLBICO2 Replace the light bulb, To replace the light bulb, Problem, Possible sollution Check if