John Lewis JLDWS1208 Technical data, Installation, Unpacking, Fitting under a counter

Models: JLDWS1208

1 36
Download 36 pages 22.85 Kb
Page 27
Image 27
Technical data

Technical data

Dimensions

Electrical connection - Voltage - Overall power - Fuse

Water supply pressure

Capacity

Width

60 cm

Height

85 cm

Depth

60 cm

 

 

Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher door.

Minimum

0,05 MPa (0,5 bar)

Maximum

0,8 MPa (8 bar)

 

 

 

 

 

 

12 place settings

Installation

Warning! It is dangerous to alter the specifications or attempt to modify this product in any way.

This appliance is heavy. Care should be taken when moving it.

Care must be taken to ensure that the appliance does not stand on the electrical supply cable.

Any electrical work required to install this appliance must be carried out by a qualified electrician or competent person.

Any plumbing work required to install this appliance must be carried out by a qualified plumber or competent person.

Unpacking

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Fitting under a counter

(Kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre- existing top, providing the dimensions of the recess correspond to those shown in the picture.

Proceed as follows:

27

Page 27
Image 27
John Lewis JLDWS1208 Technical data, Installation, Unpacking, Fitting under a counter, Proceed as follows