John Lewis JLDWS1208 instruction manual Interrupt a washing programme in progress

Models: JLDWS1208

1 36
Download 36 pages 22.85 Kb
Page 21
Image 21
Interrupt a washing programme in progress

dishwasher door, the programme starts automatically.

Once the washing programme has started, a point-shaped optical signal appears on the floor beneath the dishwasher door.

This optical signal will remain illuminated for all the duration of the washing programme.

Setting and starting the programme with delay start

1.After having selected the washing programme, press the delay start button until the number of hours for the delay start appear in the digital display. The start of the selected washing programme can be delayed for between 1 and 19 hours.

2.Close the dishwasher door, the countdown starts automatically.

3.The countdown will decrease with steps of 1 hour.

4.The opening of the door will interrupt the countdown. Close the door; the countdown will continue from the point at which it was interrupted.

5.Once the delay start has elapsed the programme will start automatically.

Cancelling a delay start or a washing programme in progress

Simultaneously press and hold the two programme buttons positioned over the word Cancel, until all the programme button lights come on.

Cancelling a delay start involves also the cancelling of the washing programme set. In this case you have to set the washing programme again.

If a new washing programme is to be selected, check that there is detergent in the detergent dispenser.

Warning! Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary. Attention! Hot steam may escape when the door is opened. Open the door carefully.

Interrupt a washing programme in progress

Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted.

End of the washing programme

The dishwasher will automatically stop and an audible signal informs you of the end of the washing programme.

When the washing programme has ended, the optical signal on the floor beneath the dishwasher door will turn off.

1.Open the dishwasher door.

The indicator light of the programme just ended remains illuminated.

2.Switch off the dishwasher by pressing the On/Off button.

3.Leave the dishwasher door ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.

21

Page 21
Image 21
John Lewis JLDWS1208 instruction manual Interrupt a washing programme in progress